Dan Lee Dan Lee's Profile Page

Dan Lee Dan Lee

0 Course Enrolled • 0 Course Completed

Biography

HPE7-A06 Exam Book | HPE7-A06 Reliable Study Plan

As we all know, it is a must for all of the candidates to pass the exam if they want to get the related HPE7-A06 certification which serves as the best evidence for them to show their knowledge and skills. If you want to simplify the preparation process, here comes a piece of good news for you. We will bring you integrated HPE7-A06 Exam Materials to the demanding of the ever-renewing exam, which will be of great significance for you to keep pace with the times.

The hit rate for HPE7-A06 exam guide is as high as 99%. Obviously such positive pass rate will establish you confidence as well as strengthen your will to pass your HPE7-A06 exam. No other vendors can challenge our data in this market. At the same time, by studying with our HPE7-A06 practice materials, you avoid wasting your precious time on randomly looking for the key point information. We provide a smooth road for you to success.

>> HPE7-A06 Exam Book <<

HPE7-A06 Reliable Study Plan | Dump HPE7-A06 File

The HP HPE7-A06 desktop practice test software and web-based practice test software, both are the mock HPE Campus Access Switching Expert Written Exam (HPE7-A06) exam that provides you real-time HPE7-A06 exam environment for quick and complete preparation. Whereas the HP HPE7-A06 PDF Dumps file is concerned, this file is simply a collection of real, valid, and updated HPE Campus Access Switching Expert Written Exam (HPE7-A06) exam questions that also help you in preparation. So choose the right "PrepAwayExam" exam questions format and start HPE7-A06 exam preparation today. Order your HPE7-A06 Dumps now to Avail 25% EXTRA Discount on the HPE7-A06 Exam Dumps learning material and get your dream certification.

HPE Campus Access Switching Expert Written Exam Sample Questions (Q14-Q19):

NEW QUESTION # 14
A customer has configured eBGP peering using local AS 65000 with two routers from a CX 6300 VSF stack with thefollowing switch ports:
[ports connecting to router-1 10.10.10.2]

The LAGs are connected lo third-party L2 switches, which are used as a transit network for the remote eBGP routers. To optimise the possible BGP peering issues. The AOS-CX switch Is configured with theglobal settings:

What needs to be done on the AOS_CX switch to enable the bidirectional forwarding with the eBGP peers?

A. Option B
B. Option C
C. Option D
D. Option A

Answer: A

Explanation:
The goal is to enable Bidirectional Forwarding Detection (BFD) for eBGP neighbors 10.10.10.2 and
10.10.20.2 on the AOS-CX VSF stack (AS 65000). Global BFD settings are already configured. We need the specific commands to link BFD state to the BGP neighbor relationship.
* BFD for BGP Configuration:Requires enabling the fall-over bfd parameter for the specific neighbor within the router bgp <asn> configuration hierarchy.
* Analyzing the Options (New Image):
* Option 1 (Top):
router bgp 65000
address-family ipv4 unicast
neighbor 10.10.10.2 fall-over bfd
neighbor 10.10.20.2 fall-over bfd
This enables BFD specifically within the ipv4 unicast address family context for both neighbors. This is a valid configuration location.
* Option 2 (Second):
router bgp 65000
neighbor 10.10.10.2 fall-over bfd
neighbor 10.10.20.2 fall-over bfd
This enables BFD directly under the main neighbor <ip> configuration lines within router bgp 65000. This typically applies BFD to all address families configured for that neighbor relationship (including IPv4 unicast). This is also a valid and common configuration location.
* Option 3 (Third):
int 1/1/1-1/1/2, 2/1/1-2/1/2
fall-over-bfd
Incorrect. Applies BFD configuration under an interface range context, which is not how BFD is linked to BGP sessions.
* Option 4 (Bottom):
interface lag1-2
fall-over bfd
Incorrect. Applies BFD configuration under an interface LAG range context, which is not how BFD is linked to BGP sessions.
* Comparing Valid Options (1 vs 2):Both Option 1 and Option 2 correctly use the fall-over bfd command under router bgp. Option 1 provides per-address-family granularity, while Option 2 applies it to the neighbor generally. Without a specific requirement to enable BFDonlyfor IPv4, applying it at the neighbor level (Option 2) is often simpler and sufficient. Both achieve the goal for the required IPv4 peering. In many documentation examples, the configuration is shown at the neighbor level unless per- AF control is explicitly needed.
* Conclusion:Both Option 1 and Option 2 show valid configuration methods. Option 2 is arguably slightly more common/general when BFD is desired for the overall neighbor relationship.
References:AOS-CX BFD Guide, AOS-CX BGP Guide (neighbor commands, fall-over bfd option). This relates to "Routing" (16%) and "Network Resiliency and virtualization" (8%) objectives.

NEW QUESTION # 15
A customer is trialing the below colorless port configuration on a single switch and has noticed that users roaming to access points connected to the test switch are unable to receive an IP address on the corporate Wi- R network, which is operating in bridged mode All other SSIDs are working as expected and the AP is Online in HPE Aruba Networking Central.
The security team reports that there have been no failed authentications m HPE Aruba Networking ClearPass Access Tracker and that the last entry for the wiredport is returning the KADIUS Aruba-User-Hold attribute
'Access_Point.
Which configuration change is required to resolve the issue?

A. port-access client-move enable
B. interface 1/1/1/1-1/48
port-access onboarding-method concurrent enable
C. interface 1/1/1-1/1/48
aaa authentication port-access client-limited 0
D. port access role Access_point auth-mode device-mode

Answer: C

Explanation:
The issue involves users roaming to APs connected to a test switch failing to receive an IP address on the corporate Wi-Fi network (bridged mode), with ClearPass reporting a RADIUS Aruba-User-Role attribute of Access_Point. The goal is to identify the configuration change needed to resolve this issue.
* Analysis of Options:
* Option A (port-access client-move enable):Enables client movement between ports but does not address the AP authentication issue.
* Option B (aaa authentication port-access client-limit 0):Correct. Setting the client limit to 0 on the switch ports (1/1/1-1/1/48) disables MAC authentication for APs, allowing them to be treated as trusted devices and preventing the application of an incorrect role.
* Option C (port-access onboarding-method concurrent enable):Enables concurrent onboarding but is unrelated to the AP role issue.
* Option D (port-access role Access_point auth-mode device-mode):Configures a device mode role but does not resolve the IP assignment issue caused by incorrect authentication.
* Why Option B is Correct:The issue arises because the switch is applying 802.1X or MAC authentication to the AP ports, resulting in ClearPass assigning the Access_Point role, which restricts client connectivity. By setting aaa authentication port-access client-limit 0 on the AP-connected ports (1
/1/1-1/1/48), the switch disables port-access authentication for these ports, treating the APs as trusted devices. This allows clients to authenticate properly via the AP and receive IP addresses in bridged mode, resolving the issue.
* Relevance to Certification Objectives:
* WLAN (9%):Involves troubleshooting wireless functions and Layer 2 issues related to AP connectivity.
* Authentication/Authorization (9%):Includes troubleshooting ClearPass integration and 802.1X configurations.
* Security (10%):Covers troubleshooting wired 802.1X implementations.
References:
HPE Aruba Networking AOS-CX Configuration Guide: Port Access Authentication, detailing client-limit configuration.
HPE7-A06Study Guide: Covers ClearPass integration and AP authentication troubleshooting.
HPE Aruba Networking Technical Documentation: Dynamic Segmentation and Port Access Security.

NEW QUESTION # 16
A pair of CX 8325 series switches a configured in a VSX cluster. Which function is executed on both VSX members during normal operation?

A. replies to ARP requests with thecluster vMAC
B. periodically sends gratuitous ARP and broadcast hello packets
C. relays DHCP requests or serves DHCP offer
D. routes PIM and PIM-DR

Answer: A

Explanation:
The question asks which function is executed on both VSX members (CX 8325 switches) during normal operation in a VSX cluster.
* Analysis of Options:
* Option A:Correct. Both VSX switches reply to ARP requests with the cluster's virtual MAC (vMAC) for SVIs configured with active-gateway, ensuring consistent Layer 3 forwarding.
* Option B:Incorrect. PIM (Protocol Independent Multicast) and PIM-DR roles are typically handled by one switch, not both, in a VSX cluster.
* Option C:Incorrect. DHCP relay or server functions are not necessarily performed by both switches simultaneously.
* Option D:Incorrect. Gratuitous ARP and broadcast hello packets are typically sent by the primary switch or specific protocols, not both VSX members for all cases.
* Why Option A is Correct:In a VSX cluster, the active-gateway feature allows both switches to respond to ARP requests for Switched Virtual Interfaces (SVIs) using a shared virtual MAC address (vMAC). This ensures seamless Layer 3 forwarding and high availability, as clients receive consistent ARP replies regardless of which VSX switch processes the request. The vsx-sync feature ensures the vMAC is synchronized, enabling both switches to perform this function during normal operation, as per HPE Aruba Networking's VSX architecture.
* Relevance to Certification Objectives:
* Network Resiliency and Virtualization (8%):Designing and troubleshooting VSX for redundancy and active-active forwarding.
* Switching (19%):Implementing Layer 2/3 technologies, including ARP handling in VSX.
* Routing (16%):Ensuring consistent Layer 3 operations in VSX environments.
References:
HPE Aruba Networking AOS-CX Configuration Guide: VSX Configuration, detailing active-gateway and vMAC usage.
HPE7-A06Study Guide: Covers VSX Layer 3 functions and ARP handling.
HPE Aruba Networking Technical Documentation: VSX Active-Gateway Best Practices.

NEW QUESTION # 17
Exhibit.

After an initial setup of CX 8325 VSX configuration, the active gateway is set up for SVI 10. For testing purposes. SVI 10 on sw-aggi is shut down while traffic from the client connected to Edge-1 is initiated towards the default route.
What is the expected behavior white performing this test?

A. Traffic is forwarded over the ISL without the risk of dropped packets.
B. Traffic is dropped and vsx-sync will disable SVI10 on agg-sw2 automatically.
C. Traffic is potentially dropped between the client and the destination.
D. Traffic Is unaffected and a 50nsfailover time is expected for agg-sw2 to start traffic forwarding.

Answer: D

Explanation:
The question involves a VSX configuration with CX 8325 switches (agg-sw1 and agg-sw2) where SVI 10's active-gateway is set up. For testing, SVI 10 on agg-sw1 is shutdown, and traffic from a client connected to Edge-1 is initiated toward the default route. The task is to determine the expected behavior.
* Analysis of Options:
* Option A:Incorrect. Traffic is not dropped, as VSX ensures redundancy via the active-gateway on agg-sw2.
* Option B:Incorrect. Traffic does not traverse the ISL unnecessarily; agg-sw2 takes over directly.
* Option C:Correct. Traffic continues unaffected, with a 50ms failover time for agg-sw2 to assume forwarding responsibilities for SVI 10.
* Option D:Incorrect. Traffic is not dropped, and vsx-sync does not disable SVI 10 on agg-sw2; it ensures consistency.
* Why Option C is Correct:In a VSX cluster with active-gateway, both switches (agg-sw1 and agg- sw2) share a virtual IP and vMAC for SVI 10, allowing either to respond to ARP requests and forward traffic. Shutting down SVI 10 on agg-sw1 triggers agg-sw2 to take over Layer 3 forwarding, leveraging the active-gateway configuration. VSX's fast failover mechanism ensures a typical failover time of approximately 50ms, making the transition seamless for clients on Edge-1. The vsx-sync feature ensures SVI configurations remain consistent, preventing traffic disruption. This behavior aligns with HPE Aruba Networking's VSX high-availability design.
* Relevance to Certification Objectives:
* Network Resiliency and Virtualization (8%):Designing and troubleshooting VSX for high availability.
* Routing (16%):Ensuring seamless Layer 3 forwarding in VSX environments.
* Troubleshooting (10%):Diagnosing failover behavior in campus networks.
References:
HPE Aruba Networking AOS-CX Configuration Guide: VSX Active-Gateway and Failover.
HPE7-A06Study Guide: Covers VSX high-availability and failover times.
HPE Aruba Networking Technical Documentation: VSX Best Practices for Layer 3 Redundancy.

NEW QUESTION # 18
Exhibit.

A conference venue has a requirement to secure independent network users from each other in their network.
The following configurations are created on Edge-1:

A. change the VLAN 152 type. primary-vlan 152
B. change the VLAN 151 private-vlan community
C. change the VLAN 151 primary-vlan 151
D. change the VLAN 152 private-vlan community

Answer: B

Explanation:
The requirement is to secure independent network users from each other in a conference venue using Edge-1.
This scenario typically calls for Private VLANs,specifically using the 'isolated' type to prevent communication between hosts within the same secondary VLAN.
* Analysis of Options:
* Private VLANs consist of a primary VLAN and one or more secondary VLANs (isolated or community). Isolated ports cannot communicate with other isolated ports in the same VLAN; they can only communicate with promiscuous ports (usually the router uplink). Community ports can communicate with each other and promiscuous ports.
* Option A: Configures VLAN 152 as private-vlan community.
* Option B: Configures VLAN 151 as private-vlan community.
* Option C: Defines VLAN 152 as a primary-vlan associated with itself, which isn't standard syntax
/logic.
* Option D: Defines VLAN 151 as a primary-vlan associated with itself.
* The goal isisolation. None of the options directly configure an isolated VLAN. Options A and B configure community VLANs, which allow communication between users within that VLAN, contradicting the requirement. Options C and D attempt to define primary VLANs in a potentially incorrect way.
* Caveat:There seems to be an issue with the provided options. Standard configuration to make VLAN 151 isolated would involve defining a primary VLAN (e.g., vlan 152 private-vlan primary) and then defining VLAN 151 as isolated (vlan 151 private-vlan isolated). Since none of the options correctly configure anisolatedVLAN, and the requirement is isolation, the question or options are likely flawed. However, if forced to interpret intent, questions sometimes test understanding of thetypesof private VLANs. Changing a VLANtocommunity type (Option B for VLAN 151) is a distinct action, even if it doesn't meet the statedisolationgoal. Without correct options for 'isolated', selecting the 'best' flawed option is difficult. Assuming the question intends to configure VLAN 151 assome typeof private secondary VLAN, Option B modifies VLAN 151's private VLAN characteristic.
* Conclusion:Based on the requirement for isolation, none of the provided options are correct. However, if assuming a potential error in the question or options and needing to select the closest modification related to private VLAN types for VLAN 151, Option B is chosen tentatively, despite configuring
'community' instead of the required 'isolated'.
References:AOS-CX Security Guide (Private VLAN configuration), Private VLAN concepts (Primary, Isolated, Community). This relates to the "Switching" (19%) and "Security" (10%) objectives.

NEW QUESTION # 19
......

For candidates who are going to choose the HPE7-A06 training materials online, the quality must be one of the most important standards. With skilled experts to compile and verify, HPE7-A06 exam braindumps are high quality and accuracy, and you can use them at ease. In addition, HPE7-A06 exam materials are pass guarantee and money back guarantee. You can try free demo for HPE7-A06 Exam Materials, so that you can have a deeper understanding of what you are going to buy. We have online and offline chat service stuff, and if you have any questions for HPE7-A06 exam materials, you can consult us.

HPE7-A06 Reliable Study Plan: https://www.prepawayexam.com/HP/braindumps.HPE7-A06.ete.file.html

HP HPE7-A06 Exam Book Our braindumps comprise the most significant questions and answers that have every possibility to be the part of the real exam, Now, I will briefly introduce some details about our HPE7-A06 study materials for your reference, We guarantee all our on-sales products are high-quality and latest HP HPE7-A06 Reliable Study Plan exam dump, Obtaining a professional certificate (HPE7-A06 study guide) can be beneficial to you future, higher wages, good benefits, and a dreaming promotion.

It can also lead to unexpected errors when we HPE7-A06 Reliable Study Plan call a function with arguments of unanticipated types, Hair is a tough nut to crack, Our braindumps comprise the most significant HPE7-A06 Questions and answers that have every possibility to be the part of the real exam.

Free PDF Quiz HP - Latest HPE7-A06 Exam Book

Now, I will briefly introduce some details about our HPE7-A06 study materials for your reference, We guarantee all our on-sales products are high-quality and latest HP exam dump.

Obtaining a professional certificate (HPE7-A06 study guide) can be beneficial to you future, higher wages, good benefits, and a dreaming promotion, No matter when you purchase our HPE7-A06 test dumps insides, we will notify you to download our latest HP test questions while we release new version.